Product ID:Q-THANE EPOXY CATALYST 40T2R
MSDS Date:05/13/1986
FSC:8040
NIIN:00F040218
MSDS Number: BXLFV

VALSPAR CORP

1101 THIRD ST SOUTH
MINNEAPOLIS, MN 55415-5000
US

Emergency Phone: 612-332-7371/800-228-5635

Info Phone: 612-332-7371/800-228-5635

Cage: 13374

VALSPAR CORPORATION

MINNEAPOLIS, MN 55415 US

Telephone: 612-332-7371/888-345-5732

Cage: 23526

CYCLOHEXANONE

CAS: 180-94-1

RTECS: GW1050000

OSHA PEL 200 MG/CUM

ACGIH TLV: 100 MG/CUM

ETHYL ACETATE

CAS: 141-78-6

RTECS: AH5425000

OSHA PEL 1400 MG/CUM

ACGIH TLV: 1400 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

2-BUTANONE (METHYL ETHYL KETONE) (MEK)

CAS: 78-93-3

RTECS: EL6475000

OSHA PEL 200 PPM

ACGIH TLV: 590 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

METHYLENE BIS(4-CYCLOHEXYLISOCYANATE)

CAS: 5124-30-1

RTECS: NQ9250000

Fraction By Weight: 1-3%

ACGIH TLV: 0.054 MG/CUM

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATION OF THE RESPIRATORY TRACT &
MUCOUS MEMBRANES. EXPOSURE CAN LEAD TO ALLERGENIC SENSITIVITY.
REPEATED/PROLONGED OVEREXPOSURE TO SOLVENTS CAN CAUSE PERMANENT
BRAIN & NERVOUS SYSTEM DAMAGE.
Effects of Overexposure:IRRITATION, COUGHING, HEADACHE, SHORTNESS OF
BREATH.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY/SKIN CONDITION.

First Aid:SKIN: WASH W/SOAP & WATER. EYES: WASH W/WATER FOR 15 MINS.
INGESTION: INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR. GIVE
OXYGEN IF NEEDED. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:OC
Flash Point:25F
Extinguishing Media:FOR CLASS B FIRES

Spill Release Procedures:COVER W/ABSORBENT MATERIAL, SUCH AS SAWDUST,
THEN COLLECT IN DISPOSAL CONTAINERS FOR PROPER DISPOSAL.

Handling and Storage Precautions:IAW/OSHA REGULATIONS.
Other Precautions:IAW/OSHA REGULATIONS. INTENTIONAL MISUSE BY
DELIBERATELY CONCENTRATING & INHALING THE CONTENTS MAY BE
HARMFUL/FATAL.

Respiratory Protection:IAW/OSHA REGULATIONS.
Ventilation:REQUIRED
Protective Gloves:IMPERVIOUS
Eye Protection:SPLASH GOGGLES
Supplemental Safety and Health

Vapor Density:>1
Spec Gravity:1.01
Solubility in Water:COMPLETE
Appearance and Odor:NORMAL FOR COATINGS PRODUCT
Percent Volatiles by Volume:40

Stability Indicator/Materials to Avoid:YES
WATER, AMINES & ALCOHOLS
Stability Condition to Avoid:HEAT, MOISTURE.
Conditions to Avoid Polymerization:HEAT, MOISTURE.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. W/EPA RCRA REGULATIONS. WASTE SOLVENT COATING IS A
HAZARDOUS WASTE, IGNITABLE WASTE D-001.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.